Licenses - Open Source Cartridge Reader
Software Licenses : GPL v3
Hardware Licenses : Open Source Hardware Created by modifying "Open Source Cartridge Reader" (sanni Github (Licensed under CC BY 4.0))
The build quality is super high on this ROM dumper and I'm very happy with my purchase. I think the walnut board on it looks great and I've been real happy being able to back up my games.
Very well built high quality Game Gear adapter for the Open Source Card Reader. Includes the RetroSix Game Gear cartridge connector.
FDSKEY is a cool device. It plugged right in and let me easily switch between disk based titles. Only issue is that i have graphic glitching issues, which is somewhat of a known issue and require some soldering to fix: https://consolemods.org/wiki/NES:Famicom_Disk_System_Glitching_Sprites_Fix
The OSCR project is amazing! I've been using the OSCR for a couple years to back up my collection of cartridges for many different systems. Save The Hero Builders provides an excellent service to purchase a prebuilt kit, as well as all the various adapters to achieve compatibility as you need. STHB provides amazing customer service and I can't recommend them enough. The STHB V3-Alter Cartridge Reader is top quality. Thank you STHB!
Arrived quickly and packaged very well as always. Build quality is amazing and works perfectly.
This kit is amazing! Works great right out of the box with intuitive instructions on the case itself. The quality is superb and well-built!
The cartridge reader worked great immediately after opening the box. I was able to rescue some very old saves on several cartridges. Backing up various cartridges work well too for SNES, Genesis, SMS, GG, and GBA.
しっかりカートリッジを掃除しても読み込まないことが多い。レトロフリークでは読み込むので、製品の問題だと思う。
この度はご迷惑をおかけして申し側ございません。読み込みにシビアな点があるのは否めません。
あまりにも読み込まないようでしたら機械のトラブルも考えられます（1/2や1/3の確率でだめになる等）。
まずPCとつなぎ一度アッドデートをし、SDカードの中のデータも新しくしてそれでも変わらないようでしたら送料着払でお送りください。こちらで調査致します。
よろしくお願いいたします。
---
How to flash the Arduino
https://github.com/sanni/cartreader/wiki/How-to-flash-the-Arduino
Preparing the SD Card
https://github.com/sanni/cartreader/wiki/Preparing-the-SD-Card
---
連絡先
savetheherobuilders@gmail.com
So, I bought this adaptor to backup my NES saves and it worked surprisingly well! Only complaints I would have is the adaptor is not as easy to use as the other built-in options. From what I can tell there is no auto-detection for NES carts. You have to go to the NES cartridge forum and find the setting for the specific game you want to backup BEFORE hitting anything on the S.T.H builder. After punching in all the correct cart information it works great, but you have to be very specific beforehand. I put some labels on the back of my carts after backing up just for future use. Also the file structure doesn't remember the name of your NES game with this method so I'd advise doing your backup and then plugging it into your PC to change the names of the newly created files before you move on.
Also, it is pretty thin and flimsy feeling so to make it sturdier you can saw an unused SNES cart down and put this board into the empty shell. It is designed to drop in perfectly and even matches the keying so you can't insert it backwards. After about an hour of sanding, applying some hot glue and cleaning up my custom Cart it looked like this. Even added the Ukraine sticker to complete the look i wanted. It's much sturdier now and looks great. Hopefully this gives the next buyer some good ideas for their own build.
Thank you again SaveTheHero! You are preserving my whole collection and a history of my childhood game saves going back over thirty years.
Hello Ryoku san, Thank you so much for the wonderful review!
NES has an automatic title detection feature. Could you please refer to this and give it a try?
Also, please make sure to clean the cartridge contacts before dumping.
Please update the device and replace the contents of the SD card as well.
Dumping NES Games
https://github.com/sanni/cartreader/wiki/Dumping-NES-Games
https://github.com/sanni/cartreader/wiki/Adding-auto-mapper-to-a-game
How to flash the Arduino
https://github.com/sanni/cartreader/wiki/How-to-flash-the-Arduino
Preparing the SD Card
https://github.com/sanni/cartreader/wiki/Preparing-the-SD-Card
savetheherobuilders@gmail.com
If it doesn’t work, feel free to contact me via the chat button at the bottom right of the website or by email.
Thank you!