READING SNES SA1 CARTRIDGE & Save N64 Eeprom+RTC

¥4,200
¥4,200
Shipping calculated at checkout.

Description

This item cannot be purchased separately
Please be sure to buy it together with "cartridge reader V3" itself.

Click here to purchase only RTC+Clock Generator.

  • SNES cartridges exist with titles incorporating the SA1 chip
  • The eeprom format exists for N64 save data. 
  • The RTC records the date and time on the dumped data.

Github page

Clock generator is used by: SNES SA1, SNES SF Memory, SNES Satellaview, SNES SPC7110(not sure), N64 eeprom save

Eeprom saves require a clock generator.
Slide the CLK1 side switch up.

Notes on games with SA-1 and similar special chips:

To unlock cartridges with SA-1 you need both the Clock Generator and the snesCIC installed.
It's very important to provide the Nintendo Cart Reader with a high quality power source for dumping SA-1 games,not all USB ports will work. Best use a 5V/2A phone charger. An original iPhone or Amazon Fire Tab charger works great while a cheap Chinese phone charger might not unlock SA-1. Sometimes disabling the CLK1 switch will improve unlocking.

Clock Signal Generator+RTC  (Real time Clock - A record of the date and time is kept in the saved data.)

⚠To enable RTC, connect the cartridge reader to a PC and turn on the RTC setting.
Please turn on other settings as needed.
*HW3 setting must be turned on for it to work.

How to flash the Arduino


Uses a CR16xx (the same used by HW5) battery, which is located on the back of the PCB. 
Gives advanced users options:
The on-board 3.3V 1000mA (1A) linear regulator can be utilized to provide 3.3V to the main PCB allowing for an easy "headless" (serial-only) HW5 build or the use of an LCD module without a 3.3V out option.
Optional support to hardwire VBUS (+5V USB) to the module. This allows the RTC to remain powered by VBUS and not drain the battery when leaving the OSCR plugged in but powered off.
Purple 4-layer PCB with ENIG (gold) finish.
Designed in the USA. Made in China.

Reads N64 roms and reads/writes save games(4K/16K Eeprom + Sram + all 3 types of Flashram)

RTC made by Ancyker


Tab title

This item cannot be purchased separately
Please be sure to buy it together with "cartridge reader V3" itself.

Click here to purchase only RTC+Clock Generator.

  • SNES cartridges exist with titles incorporating the SA1 chip
  • The eeprom format exists for N64 save data. 
  • The RTC records the date and time on the dumped data.

Github page

Clock generator is used by: SNES SA1, SNES SF Memory, SNES Satellaview, SNES SPC7110(not sure), N64 eeprom save

Eeprom saves require a clock generator.
Slide the CLK1 side switch up.

Notes on games with SA-1 and similar special chips:

To unlock cartridges with SA-1 you need both the Clock Generator and the snesCIC installed.
It's very important to provide the Nintendo Cart Reader with a high quality power source for dumping SA-1 games,not all USB ports will work. Best use a 5V/2A phone charger. An original iPhone or Amazon Fire Tab charger works great while a cheap Chinese phone charger might not unlock SA-1. Sometimes disabling the CLK1 switch will improve unlocking.

Clock Signal Generator+RTC  (Real time Clock - A record of the date and time is kept in the saved data.)

⚠To enable RTC, connect the cartridge reader to a PC and turn on the RTC setting.
Please turn on other settings as needed.
*HW3 setting must be turned on for it to work.

How to flash the Arduino


Uses a CR16xx (the same used by HW5) battery, which is located on the back of the PCB. 
Gives advanced users options:
The on-board 3.3V 1000mA (1A) linear regulator can be utilized to provide 3.3V to the main PCB allowing for an easy "headless" (serial-only) HW5 build or the use of an LCD module without a 3.3V out option.
Optional support to hardwire VBUS (+5V USB) to the module. This allows the RTC to remain powered by VBUS and not drain the battery when leaving the OSCR plugged in but powered off.
Purple 4-layer PCB with ENIG (gold) finish.
Designed in the USA. Made in China.

Reads N64 roms and reads/writes save games(4K/16K Eeprom + Sram + all 3 types of Flashram)

RTC made by Ancyker


Customer Reviews

Based on 16 reviews
100%
(16)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
R
Ryan Aquino
SAVE UR Save Files!!!!

If this device doesn’t just have everything, it’s great to get the little add-on so not only can you back up your roms but you can get those safe files backed up too also recommend the magnetic charging cable. It’s great for this product. Don’t overlook the extras.

S
Stephen Silva
It all works beautifully!

Works just as intended, and design was just as specified! Would buy again if I ever need to!

M
M.M.
Exactly what I needed.

The device served my needs and had no problem running from a Nintendo Switch power adapter.

A
Anonymous

Delivered as descibed. Very nice.

R
Raymond Finger
Great device

Works much better for archiving my game collection than other tools I’ve used

A
Alvaro La Rosa
Wonderful to save old games

This is a phenomenal piece of technology that has allowed me to save old video games going back to the NES in digital format. Would highly recommend to anyone that wants to keep a digital back up for old cartridge games.

J
Jesse

100% awesome! Customer service and the product works amazing!

D
David Gatterbauer
splendid

so far everything works perfectly, great product, thank you for your service! :)

C
Colin M.

Worked an absolute charm, efficient and reliable for my collection.

J
Juan

High Quality